1. Deep carbonized WPC decking
By pyrolyzing wood at high temperature, the concentration of hydroxyl groups in wood components is reduced, thereby reducing the hygroscopicity and internal stress of wood, reducing wood deformation, improving wood corrosion resistance, inhibiting the growth of decay bacteria, and achieving the purpose of weather resistance and corrosion resistance.

2. Anticorrosion treatment of WPC decking
In order to maintain the original strength and beauty of the wood for a long time, it is treated with anti-corrosion and ant-proof. Under the premise of strict quality management, pressurized injection of M.ACQ makes the chemicals penetrate deeply, the penetrated chemicals can be tightly attached to the wood cells without loss, decaying bacteria and termites can be avoided, thus greatly improving corrosion resistance It can maintain the anti-corrosion and anti-ant effect for a long time. The chemical M.ACQ used in this product does not contain chromium, arsenic, organic phosphorus and other harmful substances, and is a very safe water-soluble chemical.

3. Wood WPC decking
It is a brand-new green environmental protection profile, which is processed by special processes (such as extrusion, molding, injection molding, etc.). Plastic wood has the characteristics of natural fibers and plastics at the same time, and has excellent water resistance, the water absorption rate is only a few thouhs of wood, the wear resistance is 3-10 times that of wood, steel and bearing capacity are greater than all plastic materials, and thermal expansion The cold shrinkage capacity is smaller than that of steel and all-plastic materials, and the machinability is better than that of wood, steel, plastic and other materials, and the later maintenance cost is low.

4. Co-extrusion WPC decking
A revolutionary new generation of external building materials, it has the advantages of beautiful surface, high bearing capacity, strong toughness, durable, waterproof, fireproof, anti-ant, anti-corrosion, anti-aging, oil-resistant, easy to process, easy to install, easy to maintain, and environmentally friendly .

Outdoor gazebo, gallery frame, guardrail: deep carbonized wood, preservative wood, WPC profile, PVC micro-foaming profile are suitable for the production and installation of outdoor gazebo, gallery frame and guardrail.

The installation process of WPC decking

WPC decking is a composite environmental protection decking. It has good surface properties on the moisture-proof and waterproof layer. What should be paid attention to in the installation of WPC decking? Because the characteristics of WPC decking are relatively unique, more care should be taken during the installation process. In order to prevent engineering construction During the negative impact of the period, the installation focus of WPC decking has two points:

1. Before installing WPC decking
Professionally install WPC decking from a technical point of view. Before starting the installation work, make sure that the WPC decking is dry enough, neat and level, to ensure the final actual effect with good conditions, and to make the installation work more smoothly. Install gadgets in time and prepare in advance, often use hand drills and carpenter's gadgets, labor protection supplies rubber gloves are prepared in advance, and there are more stainless steel plate screws, installation of hand drills and other WPC decking are essential gadgets.
Since the plastic material itself has relatively little ductility compared to the wooden decking material, the wooden decking in the middle and the main development fixed keel are fixed, it is best to use a hand drill to drill the hole, and then use the developed stainless steel plate to fix it between the two, The key is to play a strengthening role and prevent WPC decking from being damaged.

2. The process of installing WPC decking
The main WPC decking studs are fixed to the neat concrete floor of the horizontal main joists, ensuring this symmetry, at least more than 30cm apart each. The main keel in the middle should be drilled with a hand electric drill. The diameter of the drill hole is not less than the diameter of the screw. After the screw is screwed into the main keel and fixed, the concrete is fixed on the ground with stainless steel screws. The screws must be fully tightened, such as The main keel of WPC decking should not be exposed, causing unevenness of WPC decking.
For the design of the upper and lower male and grooves of all wood decking, before the fixed installation, the two sides of the first wood decking will be sawed off, and then the surface will be drilled with a hand electric drill. The application of stainless steel screws will be fixed on the main keel. WPC decking can be.